BBRTD - S1184 CONDUCTIVE ADHESIVE #3032, PART A
- MSDS: BBRTD
- Manufacturer: RAYCHEM CORP
- Product Name: S1184 CONDUCTIVE ADHESIVE #3032, PART A
- National Stock Number: 8040-00F005107
Product Identification
Product ID:S1184 CONDUCTIVE ADHESIVE #3032, PART A
MSDS Date:01/01/1987
FSC:8040
NIIN:00F005107
MSDS Number: BBRTD
Responsible Party
Emergency Phone: (415) 361-3333
Cage: FO008
Contractor
Telephone: 650-361-4907
Cage: FO008
Ingredients
SILVER-FILLED BISPHENOL A - EPICHLOROHYDRIN EPOXY RESIN
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 2%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:IRRITANTS TO EYES AND SKIN. REPEATED OR
PROLONGED CONTACT MAY CAUSE A SENSITIZATION.
First Aid
First Aid:EYES: FLUSH WITH WATER; SEEK MEDICAL ATTENTION. SKIN: WASH
AFFECTED AREAS WITH SOAP & WATER. OCCASIONALLY INDIVIDUALS MAY
BECOME SENSITIZED. CONSULT A DOCTOR IF ALLERGIC SYMPTOMS DEVELOP.
INGESTION: C ONSULT A DOCTOR.
Fire Fighting
Flash Point:480F
Extinguishing Media:STANDARD (CO2, DRY POWDER, FOAM).
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IN
ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:TOXIC FUMES WILL BURN EVOLVED IN A FIRE.
Accidental Release
Spill Release Procedures:REMOVE WITH AN INERT ABSORBENT MATERIAL SUCH
AS A TISSUE OR SAND. CARE SHOULD BE TAK TO AVOID CONTACT WITH SKIN
OR EYES. CLEAN UP RESIDUE WITH SOAP AND WATE
Handling
Handling and Storage Precautions:ALL CONTACT WITH EYES, SKIN AND MOUTH
MUST BE AVOIDED. AVOID BREATHING OF VAPORS. WASH HANDS TROUGHLY
BEFORE EATING, DRINKING OR SMOKING.
Other Precautions:STORE IN COOL DRY ENVIRONMENT.
Exposure Controls
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:PREVENT CONTACT WITH SKIN OR EYES.
Supplemental Safety and Health
MSDS DATE: APR 85.
Chemical Properties
Spec Gravity:4-5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS SILVER GREY LIQ/SLIGH HYDROCARBON ODOR.
Percent Volatiles by Volume:2%
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS, BASES.
Hazardous Decomposition Products:DECOMP PRODUCTS ARE LIKELY TO BE
TOXIC/SHOULD NOT BE INHALE.
Disposal
Waste Disposal Methods:NORMAL METHODS BASED ON FEDERAL, STATE OR LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.